Richland, IN Elevation & Topographic Map

Elevation

410 ft 125 m400 ft 125 m400 ft 120 m390 ft 120 m380 ft 115 m380 ft 115 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Richland sits at about 390 ft (120 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

390 ft 120 m

nearly all residents at this height

Lowest

380 ft 115 m

on the northwest side

Highest

390 ft 120 m

on the northeast side

Average

390 ft 120 m

all land inside town limits

Richland is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	390 ft120 m
Highest point Inside town limits, on the northeast side	390 ft120 m
Lowest point Inside town limits, on the northwest side	380 ft115 m
Airport (OWB) FAA airport elevation, the highest point of its runways, 14 mi south of the town limits	407 ft124 m
Average of all land	390 ft120 m

Topographic Map

Location: Town in Spencer County, Indiana, United States
Population: 416 2024 est.
Land area: 0.5 sq mi
Density: 808 per sq mi
Coordinates: 37.9457° N, 87.1691° W
Time zone: Central UTC−6 / −5
Landform region: Interior Low Plateaus
Drains to: Ohio River → Mississippi River → Gulf of America
Airport: Owensboro/Daviess County Regional (OWB) 407 ft
ZIP codes 1: 47634

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana1,965th highest of 1,977
Towns in Spencer County19th highest of 21

Peaks and hills nearest, by height

Coal Knobs640 ft
Fisher Knobs640 ft
Nix Hill570 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.