Ragsdale, IN Elevation & Topographic Map

Elevation
580 ft 175 m550 ft 170 m540 ft 165 m510 ft 155 m480 ft 145 m460 ft 140 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Ragsdale sits at about 570 ft (175 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
570 ft 175 m
most residents: 570–580 ft
Lowest
460 ft 140 m
on the northeast side
Highest
580 ft 175 m
near the middle
Average
530 ft 160 m
all land inside the CDP boundary
Ragsdale spans about 120 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 570 ft175 m |
| Highest point Inside the CDP boundary, near the middle | 580 ft175 m |
| Lowest point Inside the CDP boundary, on the northeast side | 460 ft140 m |
| Town center USGS map point for Ragsdale | 570 ft175 m |
| Average of all land | 530 ft160 m |
Elevation profile, south to north
1.1 mi south to north through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Knox County, Indiana, United States
- Population
- 54 2020 Census
- Land area
- 0.9 sq mi
- Density
- 60 per sq mi
- Coordinates
- 38.7459° N, 87.3250° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- White River → Wabash River → Ohio River → Mississippi River → Gulf of America
- ZIP codes 2
- 47512 47573
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Ragsdale570 ft
- Bruceville520 ft
- Widner Township510 ft
- Palmyra Township510 ft
- Edwardsport500 ft
- Bicknell500 ft
- Washington Township, Knox County500 ft
- Vigo Township490 ft
- Wheatland490 ft
- Steen Township490 ft
- Emison470 ft
Rankings by typical elevation
- Towns in Indiana1,661st highest of 1,977
- Towns in Knox Countyhighest of 23
Peaks and hills nearest, by height
- Barefoot Nation Hills620 ft
- Harbstreit Hill580 ft
- Scudder Hill570 ft
- Wolf Hill520 ft
- Toms Hill490 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Ragsdale is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.