Pence, IN Elevation & Topographic Map

Elevation

710 ft 215 m710 ft 215 m700 ft 215 m690 ft 210 m680 ft 210 m680 ft 205 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Area: Fades everything outside the official CDP boundary (US Census).

Elevation Data

Pence sits at about 690 ft (210 m) above sea level, the median height of all land inside the CDP boundary (too few residents to weight by).

Typical elevation (all land)

690 ft 210 m

few residents

Lowest

680 ft 205 m

on the west side

Highest

700 ft 215 m

near the middle

Average

690 ft 210 m

all land inside the CDP boundary

Pence is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.

Figure	Elevation
Typical (all land) Median of all land; too few residents to weight by	690 ft210 m
Highest point Inside the CDP boundary, near the middle	700 ft215 m
Lowest point Inside the CDP boundary, on the west side	680 ft205 m
Town center USGS map point for Pence	700 ft215 m
Average of all land	690 ft210 m

Topographic Map

Location: Unincorporated community (census-designated place) in Warren County, Indiana, United States
Population: 41 2020 Census
Land area: 0.2 sq mi
Density: 243 per sq mi
Coordinates: 40.3611° N, 87.5114° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Wabash River → Ohio River → Mississippi River → Gulf of America
ZIP codes 1: 47993

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Judyville760 ft
Prairie Township, Warren County740 ft
Tab720 ft
Jordan Township, Warren County700 ft
Hedrick700 ft
Rossville, IL700 ft
Ross Township, Vermilion County, IL700 ft
Marshfield690 ft
Pence690 ft
South Ross Township, IL670 ft
Alvan (Alvin), IL660 ft

Rankings by typical elevation

Towns in Indiana1,302nd highest of 1,977
Towns in Warren County12th highest of 26

Peaks and hills nearest, by height

Hog Back Hill740 ft
Copeland Hill680 ft

How we measure

Typical elevation: the median height of all land inside the CDP boundary; too few residents live here to weight by people.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Pence is an unincorporated community; figures cover the census-designated place, a statistical area.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.