North Bend Township, IN Elevation & Topographic Map

Topographic elevation map of North Bend Township, Indiana, shaded from 700 ft on the south side to 780 ft on the north side
Elevation
780 ft 235 m760 ft 230 m750 ft 230 m730 ft 225 m710 ft 215 m700 ft 215 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Township area
Fades everything outside the official township boundaries (US Census).

Elevation Data

North Bend Township sits at about 730 ft (220 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
730 ft 220 m
most residents: 720–740 ft
Lowest
700 ft 215 m
on the south side
Highest
780 ft 235 m
on the north side
Average
730 ft 220 m
all land inside township boundaries

North Bend Township spans about 80 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
730 ft220 m
Highest point
Inside township boundaries, on the north side
780 ft235 m
Lowest point
Inside township boundaries, on the south side
700 ft215 m
Average of all land730 ft220 m

Elevation profile, south to north

6.0 mi south to north through the middle of North Bend Township.

Topographic Map

Topographic elevation map of North Bend Township, Indiana, shaded from 700 ft on the south side to 780 ft on the north side
Township boundaries (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
Township in Starke County, Indiana, United States
Population
1,503 2024 est.
Land area
35.5 sq mi + 0.7 sq mi water
Density
42 per sq mi
Coordinates
41.2193° N, 86.5450° W
Time zone
Central UTC−6 / −5
Landform region
Central Lowland
Drains to
Tippecanoe River → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.