Maples, IN Elevation & Topographic Map

Elevation

830 ft 250 m820 ft 250 m810 ft 250 m810 ft 245 m800 ft 245 m790 ft 240 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Area: Fades everything outside the official CDP boundary (US Census).

Elevation Data

Maples sits at about 800 ft (245 m) above sea level, the median height of all land inside the CDP boundary (too few residents to weight by).

Typical elevation (all land)

800 ft 245 m

few residents

Lowest

790 ft 240 m

on the north side

Highest

800 ft 245 m

on the south side

Average

800 ft 245 m

all land inside the CDP boundary

Maples is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.

Figure	Elevation
Typical (all land) Median of all land; too few residents to weight by	800 ft245 m
Highest point Inside the CDP boundary, on the south side	800 ft245 m
Lowest point Inside the CDP boundary, on the north side	790 ft240 m
Town center USGS map point for Maples	800 ft245 m
Airport (FWA) FAA airport elevation, the highest point of its runways, 12 mi west of the CDP boundary	815 ft248 m
Average of all land	800 ft245 m

Topographic Map

Location: Unincorporated community (census-designated place) in Allen County, Indiana, United States
Population: 85 2020 Census
Land area: 0.2 sq mi
Density: 394 per sq mi
Coordinates: 41.0128° N, 84.9691° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Maumee River
Airport: Fort Wayne International (FWA) 815 ft

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana823rd highest of 1,977
Towns in Allen County15th highest of 33

How we measure

Typical elevation: the median height of all land inside the CDP boundary; too few residents live here to weight by people.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Maples is an unincorporated community; figures cover the census-designated place, a statistical area.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); FAA airport data; BTS time zones. All public domain.