Liberty Mills, IN Elevation & Topographic Map
Elevation
820 ft 250 m810 ft 245 m800 ft 245 m780 ft 240 m760 ft 230 m750 ft 230 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Liberty Mills sits at about 780 ft (235 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
780 ft 235 m
most residents: 770–810 ft
Lowest
750 ft 230 m
on the west side
Highest
820 ft 250 m
on the northwest side
Average
790 ft 240 m
all land inside the CDP boundary
Liberty Mills spans about 70 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 780 ft235 m |
| Highest point Inside the CDP boundary, on the northwest side | 820 ft250 m |
| Lowest point Inside the CDP boundary, on the west side | 750 ft230 m |
| Town center USGS map point for Liberty Mills | 780 ft235 m |
| Average of all land | 790 ft240 m |
Elevation profile, south to north
0.9 mi south to north through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Wabash County, Indiana, United States
- Population
- 174 2020 Census
- Land area
- 0.6 sq mi
- Density
- 290 per sq mi
- Coordinates
- 41.0337° N, 85.7358° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Eel River → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Sidney910 ft
- Monroe Township, Kosciusko County900 ft
- Jackson Township, Kosciusko County860 ft
- Servia820 ft
- Cleveland Township, Whitley County810 ft
- South Whitley800 ft
- Liberty Mills780 ft
- Chester Township780 ft
- North Manchester770 ft
- Pleasant Township, Wabash County770 ft
- Laketon760 ft
Rankings by typical elevation
- Towns in Indiana930th highest of 1,977
- Towns in Wabash County7th highest of 17
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Liberty Mills is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); BTS time zones. All public domain.