Hamilton Township, IN Elevation & Topographic Map
Elevation
1,000 ft 305 m980 ft 295 m960 ft 295 m940 ft 285 m910 ft 275 m900 ft 275 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Hamilton Township sits at about 930 ft (280 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
930 ft 280 m
most residents: 920–940 ft
Lowest
900 ft 275 m
on the northwest side
Highest
1,000 ft 305 m
on the east side
Average
920 ft 280 m
all land inside township boundaries
Hamilton Township spans about 100 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 930 ft280 m |
| Highest point Inside township boundaries, on the east side | 1,000 ft305 m |
| Lowest point Inside township boundaries, on the northwest side | 900 ft275 m |
| Airport (MIE) FAA airport elevation, the highest point of its runways | 937 ft286 m |
| Average of all land | 920 ft280 m |
Elevation profile, west to east
5.9 mi west to east through the middle of Hamilton Township.
Topographic Map
- Location
- Township in Delaware County, Indiana, United States
- Population
- 7,301 2024 est.
- Land area
- 29.7 sq mi + 0.1 sq mi water
- Density
- 246 per sq mi
- Coordinates
- 40.2607° N, 85.4013° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Killbuck Creek → White River → Wabash River → Ohio River → Mississippi River → Gulf of America
- Airport
- Delaware County Regional (MIE) 937 ft
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Center Township, Delaware County950 ft
- Muncie940 ft
- Delaware Township, Delaware County940 ft
- Royerton930 ft
- Hamilton Township930 ft
- Yorktown920 ft
- Harrison Township, Delaware County920 ft
- Eaton910 ft
- Union Township, Delaware County910 ft
- Gaston890 ft
- Washington Township, Delaware County890 ft
Rankings by typical elevation
- Towns in Indiana274th highest of 1,977
- Towns in Delaware County13th highest of 21
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 770 ft at 40.2435° N, 85.3318° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); FAA airport data; BTS time zones. All public domain.