Grant County, IN Elevation & Topographic Map

Elevation
950 ft 290 m900 ft 275 m870 ft 265 m820 ft 250 m770 ft 235 m740 ft 225 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Grant County averages about 860 ft (260 m) above sea level across all its land. Its ground runs from 740 ft on the northwest side to 950 ft on the east side.
Average elevation
860 ft 260 m
all land inside the county
Highest
950 ft 290 m
on the east side
Lowest
740 ft 225 m
on the northwest side
Grant County spans about 210 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 860 ft260 m |
| Highest point Inside the county, on the east side | 950 ft290 m |
| Lowest point Inside the county, on the northwest side | 740 ft225 m |
Elevation profile, west to east
22 mi west to east through Marion.
Topographic Map
- Location
- County in Indiana, United States
- Population
- 66,458 2024 est.
- Land area
- 414.1 sq mi + 0.8 sq mi water
- Density
- 160 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Delaware County940 ft
- Blackford County900 ft
- Tipton County880 ft
- Madison County880 ft
- Grant County860 ft
- Wells County840 ft
- Howard County830 ft
- Huntington County820 ft
- Wabash County800 ft
- Miami County780 ft
Rankings by average elevation
- Counties in Indiana24th highest of 91
- Counties in the United States1,684th highest of 3,151
All 30 towns in Grant County by typical elevation
- Upland930 ft
- Jefferson Township, Grant County920 ft
- Monroe Township, Grant County890 ft
- Fowlerton880 ft
- Matthews880 ft
- Point Isabel880 ft
- Liberty Township, Grant County880 ft
- Fairmount Township870 ft
- Fairmount870 ft
- Green Township, Grant County870 ft
- Swayzee860 ft
- Sims Township860 ft
- Landess860 ft
- Sims860 ft
- Herbst860 ft
- Washington Township, Grant County860 ft
- Gas City850 ft
- Mill Township850 ft
- Jonesboro850 ft
- Van Buren Township, Grant County850 ft
- Van Buren850 ft
- Franklin Township, Grant County850 ft
- Sweetser850 ft
- Marion840 ft
- Pleasant Township, Grant County840 ft
- Center Township, Grant County840 ft
- Converse partly830 ft
- Richland Township, Grant County830 ft
- Mier820 ft
- Jalapa820 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 640 ft at 40.4599° N, 85.7915° W, is in such a hollow or patch and is not counted.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.