Gentryville, IN Elevation & Topographic Map

Elevation

490 ft 150 m460 ft 140 m450 ft 140 m430 ft 130 m410 ft 125 m400 ft 120 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Gentryville sits at about 440 ft (135 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

440 ft 135 m

most residents: 410–470 ft

Lowest

400 ft 120 m

on the southwest side

Highest

490 ft 150 m

on the northeast side

Average

440 ft 135 m

all land inside town limits

Gentryville spans about 90 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	440 ft135 m
Highest point Inside town limits, on the northeast side	490 ft150 m
Lowest point Inside town limits, on the southwest side	400 ft120 m
Town center USGS map point for Gentryville	400 ft125 m
Average of all land	440 ft135 m

Elevation profile, south to north

0.8 mi south to north through the town center.

Topographic Map

Location: Town in Spencer County, Indiana, United States
Population: 258 2024 est.
Land area: 0.4 sq mi
Density: 655 per sq mi
Coordinates: 38.1042° N, 87.0331° W
Time zone: Central UTC−6 / −5
Landform region: Interior Low Plateaus
Drains to: Little Pigeon Creek → Ohio River → Mississippi River → Gulf of America
ZIP codes 1: 47537

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana1,923rd highest of 1,977
Towns in Spencer County10th highest of 21

Peaks and hills nearest, by height

Dyson Knob650 ft
Coal Knobs640 ft
Fisher Knobs640 ft
Flint Hill580 ft
Nix Hill570 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.