Fairview Park, IN Elevation & Topographic Map
Elevation
600 ft 180 m570 ft 175 m560 ft 170 m530 ft 160 m510 ft 155 m490 ft 150 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Fairview Park sits at about 510 ft (155 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
510 ft 155 m
most residents: 500–540 ft
Lowest
490 ft 150 m
on the northeast side
Highest
600 ft 180 m
on the northwest side
Average
520 ft 160 m
all land inside town limits
Fairview Park spans about 110 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 510 ft155 m |
| Highest point Inside town limits, on the northwest side | 600 ft180 m |
| Lowest point Inside town limits, on the northeast side | 490 ft150 m |
| Average of all land | 520 ft160 m |
Elevation profile, west to east
1.3 mi west to east through the middle of Fairview Park.
Topographic Map
- Location
- Town in Vermillion County, Indiana, United States
- Population
- 1,417 2024 est.
- Land area
- 0.9 sq mi
- Density
- 1,621 per sq mi
- Coordinates
- 39.6818° N, 87.4136° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Wabash River → Ohio River → Mississippi River → Gulf of America
- ZIP codes 1
- 47842
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Helt Township610 ft
- Centenary610 ft
- Blanford580 ft
- Universal570 ft
- Lyford540 ft
- Wabash Township, Parke County530 ft
- Mecca520 ft
- Shepardsville510 ft
- Fairview Park510 ft
- Clinton Township500 ft
- Clinton500 ft
Rankings by typical elevation
- Towns in Indiana1,804th highest of 1,977
- Towns in Vermillion County15th highest of 17
Peaks and hills nearest, by height
- Pottsville Hill600 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 490 ft at 39.6793° N, 87.4165° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.