Elkhart County, IN Elevation & Topographic Map

Elevation
1,050 ft 320 m960 ft 295 m920 ft 280 m840 ft 255 m760 ft 230 m720 ft 220 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Elkhart County averages about 830 ft (255 m) above sea level across all its land. Its ground runs from 720 ft on the northwest side to 1,050 ft on Buzzard Hill.
Average elevation
830 ft 255 m
all land inside the county
Highest
1,050 ft 320 m
on Buzzard Hill
Lowest
720 ft 220 m
on the northwest side
Elkhart County spans about 330 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 830 ft255 m |
| Highest point Inside the county, on Buzzard Hill (3DEP terrain model; no NGS survey height) | 1,050 ft320 m |
| Lowest point Inside the county, on the northwest side | 720 ft220 m |
Elevation profile, south to north
22 mi south to north through Concord Township.
Topographic Map
- Location
- County in Indiana, United States
- Population
- 207,436 2024 est.
- Land area
- 463.2 sq mi + 4.8 sq mi water
- Density
- 448 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Great Lakes 92%
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Noble County930 ft
- LaGrange County920 ft
- Kosciusko County860 ft
- St. Joseph County, MI850 ft
- Cass County, MI840 ft
- Elkhart County830 ft
- Marshall County800 ft
- St. Joseph County770 ft
Rankings by average elevation
- Counties in Indiana28th highest of 91
- Counties in the United States1,752nd highest of 3,151
Peaks and hills highest inside
- Buzzard Hill1,050 ft
- Sugar Hill890 ft
All 28 towns in Elkhart County by typical elevation
- Middlebury Township890 ft
- Clinton Township, Elkhart County890 ft
- Millersburg890 ft
- Middlebury890 ft
- Locke Township870 ft
- Nappanee870 ft
- Union Township, Elkhart County870 ft
- Benton Township, Elkhart County860 ft
- Wakarusa850 ft
- Olive Township, Elkhart County840 ft
- York Township830 ft
- Benton830 ft
- Harrison Township, Elkhart County830 ft
- Jackson Township, Elkhart County820 ft
- New Paris820 ft
- Jefferson Township810 ft
- Elkhart Township800 ft
- Goshen800 ft
- Vistula790 ft
- Simonton Lake780 ft
- Dunlap780 ft
- Bristol770 ft
- Osolo Township770 ft
- Washington Township, Elkhart County770 ft
- Cleveland Township760 ft
- Concord Township760 ft
- Elkhart760 ft
- Baugo Township750 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.