Dune Acres, IN Elevation & Topographic Map

Elevation

760 ft 230 m720 ft 220 m690 ft 210 m650 ft 195 m600 ft 185 m580 ft 175 m

Contours every 100 ft, bold every 500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Dune Acres sits at about 610 ft (185 m) above sea level, the median height of all land inside town limits (too few residents to weight by).

Typical elevation (all land)

610 ft 185 m

few residents

Lowest

580 ft 175 m

on the northeast side

Highest

760 ft 230 m

near the middle

Average

620 ft 190 m

all land inside town limits

Dune Acres spans about 180 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical (all land) Median of all land; too few residents to weight by	610 ft185 m
Highest point Inside town limits, near the middle	760 ft230 m
Lowest point Inside town limits, on the northeast side	580 ft175 m
Town center USGS map point for Dune Acres	630 ft195 m
Average of all land	620 ft190 m

Elevation profile, south to north

1.9 mi south to north through the town center.

Topographic Map

Location: Town in Porter County, Indiana, United States
Population: 231 2024 est.
Land area: 2.1 sq mi + 1.3 sq mi water
Density: 109 per sq mi
Coordinates: 41.6495° N, 87.0859° W
Time zone: Central UTC−6 / −5
Landform region: Central Lowland
ZIP codes 1: 46304

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana1,590th highest of 1,977
Towns in Porter Countylowest of 31

Peaks and hills nearest, by height

Mount Tom, Porter County750 ft
Mount Baldy720 ft

How we measure

Typical elevation: the median height of all land inside the town limits; too few residents live here to weight by people.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.