Dillsboro, IN Elevation & Topographic Map

Elevation
890 ft 270 m830 ft 255 m800 ft 245 m750 ft 230 m690 ft 210 m660 ft 200 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Dillsboro sits at about 870 ft (265 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
870 ft 265 m
most residents: 860–880 ft
Lowest
660 ft 200 m
on the northeast side
Highest
890 ft 270 m
on the northwest side
Average
850 ft 260 m
all land inside town limits
Dillsboro spans about 230 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 870 ft265 m |
| Highest point Inside town limits, on the northwest side | 890 ft270 m |
| Lowest point Inside town limits, on the northeast side | 660 ft200 m |
| Town center USGS map point for Dillsboro | 870 ft265 m |
| Average of all land | 850 ft260 m |
Elevation profile, west to east
1.7 mi west to east through the town center.
Topographic Map
- Location
- Town in Dearborn County, Indiana, United States
- Population
- 1,387 2024 est.
- Land area
- 1.4 sq mi
- Density
- 1,024 per sq mi
- Coordinates
- 39.0178° N, 85.0588° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Ohio River → Mississippi River → Gulf of America
- ZIP codes 1
- 47018
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Moores Hill1,000 ft
- Elrod980 ft
- Washington Township, Ripley County970 ft
- Sparta Township910 ft
- Dillsboro870 ft
- Clay Township, Dearborn County860 ft
- Caesar Creek Township840 ft
- Pike Township, Ohio County810 ft
- Union Township, Ohio County750 ft
- Washington Township, Dearborn County730 ft
- Hogan Township720 ft
Rankings by typical elevation
- Towns in Indiana458th highest of 1,977
- Towns in Dearborn County10th highest of 24
Peaks and hills nearest, by height
- Round Hill1,000 ft
- Mulford Hill920 ft
- Henschen Hill860 ft
- Powell Hill840 ft
- Cobb Hill690 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.