Dana, IN Elevation & Topographic Map
Elevation
670 ft 205 m660 ft 200 m660 ft 200 m650 ft 195 m640 ft 195 m630 ft 195 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Dana sits at about 640 ft (195 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
640 ft 195 m
nearly all residents at this height
Lowest
630 ft 195 m
on the west side
Highest
650 ft 200 m
on the southeast side
Average
640 ft 195 m
all land inside town limits
Dana is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 640 ft195 m |
| Highest point Inside town limits, on the southeast side | 650 ft200 m |
| Lowest point Inside town limits, on the west side | 630 ft195 m |
| Town center USGS map point for Dana | 640 ft195 m |
| Average of all land | 640 ft195 m |
Topographic Map
- Location
- Town in Vermillion County, Indiana, United States
- Population
- 552 2024 est.
- Land area
- 0.3 sq mi
- Density
- 1,890 per sq mi
- Coordinates
- 39.8078° N, 87.4950° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Wabash River → Ohio River → Mississippi River → Gulf of America
- ZIP codes 1
- 47847
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Chrisman, IL640 ft
- Dana640 ft
- Prairie Township, Edgar County, IL640 ft
- Helt Township610 ft
- Brouilletts Creek Township, IL600 ft
- Vermillion Township590 ft
- St. Bernice590 ft
- Hillsdale570 ft
- Newport520 ft
- Reserve Township510 ft
- Montezuma500 ft
Rankings by typical elevation
- Towns in Indiana1,497th highest of 1,977
- Towns in Vermillion Countyhighest of 17
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.