Beaver Dam, IN Elevation & Topographic Map

Elevation
900 ft 275 m890 ft 275 m890 ft 270 m880 ft 270 m870 ft 265 m870 ft 265 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Beaver Dam sits at about 880 ft (270 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
880 ft 270 m
most residents: 870–890 ft
Lowest
870 ft 265 m
on the south side
Highest
900 ft 275 m
on the north side
Average
880 ft 270 m
all land inside the CDP boundary
Beaver Dam spans about 30 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 880 ft270 m |
| Highest point Inside the CDP boundary, on the north side | 900 ft275 m |
| Lowest point Inside the CDP boundary, on the south side | 870 ft265 m |
| Average of all land | 880 ft270 m |
Elevation profile, south to north
1.0 mi south to north through the middle of Beaver Dam.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Kosciusko County, Indiana, United States
- Population
- 248 2020 Census
- Land area
- 0.4 sq mi + 0.2 sq mi water
- Density
- 605 per sq mi
- Coordinates
- 41.0950° N, 85.9719° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Tippecanoe River → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Silver Lake890 ft
- Lake Township, Kosciusko County890 ft
- Claypool890 ft
- Beaver Dam880 ft
- Clay Township, Kosciusko County880 ft
- Seward Township870 ft
- Franklin Township, Kosciusko County860 ft
- Burket860 ft
- Akron860 ft
- Henry Township, Fulton County850 ft
- Palestine840 ft
Rankings by typical elevation
- Towns in Indiana414th highest of 1,977
- Towns in Kosciusko County9th highest of 37
Peaks and hills nearest, by height
- McElroy Hill (historical)890 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Beaver Dam is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); BTS time zones. All public domain.