St. Clair County, IL Elevation & Topographic Map

Topographic elevation map of St. Clair County, Illinois, shaded from 370 ft on the south side to 730 ft on the northwest side
Elevation
730 ft 225 m640 ft 195 m590 ft 180 m500 ft 155 m410 ft 125 m370 ft 110 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

St. Clair County averages about 470 ft (145 m) above sea level across all its land. Its ground runs from 370 ft on the south side to 730 ft on the northwest side.

Average elevation
470 ft 145 m
all land inside the county
Highest
730 ft 225 m
on the northwest side
Lowest
370 ft 110 m
on the south side

St. Clair County spans about 360 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land470 ft145 m
Highest point
Inside the county, on the northwest side
730 ft225 m
Lowest point
Inside the county, on the south side
370 ft110 m

Elevation profile, west to east

30 mi west to east through Belleville.

Topographic Map

Topographic elevation map of St. Clair County, Illinois, shaded from 370 ft on the south side to 730 ft on the northwest side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Illinois, United States
Population
251,149 2024 est.
Land area
657.7 sq mi + 16.1 sq mi water
Density
382 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Central Lowland
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 54 towns in St. Clair County by typical elevation
  1. Millstadt610 ft
  2. Millstadt Township600 ft
  3. Fairview Heights580 ft
  4. Swansea570 ft
  5. Caseyville Township560 ft
  6. St. Clair Township550 ft
  7. Shiloh550 ft
  8. Stookey Township550 ft
  9. O'Fallon550 ft
  10. O'Fallon Township540 ft
  11. Collinsville partly540 ft
  12. Belleville530 ft
  13. Floraville520 ft
  14. Freeburg Township510 ft
  15. Freeburg500 ft
  16. Columbia partly490 ft
  17. Paderborn480 ft
  18. Lebanon480 ft
  19. Lebanon Township480 ft
  20. Prairie Du Long Township480 ft
  21. Summerfield480 ft
  22. Smithton Township470 ft
  23. Smithton470 ft
  24. Shiloh Valley Township470 ft
  25. New Baden partly460 ft
  26. Marissa460 ft
  27. Marissa Township460 ft
  28. Rentchler450 ft
  29. Scott AFB440 ft
  30. Lenzburg440 ft
  31. Lenzburg Township430 ft
  32. Caseyville430 ft
  33. Mascoutah Township430 ft
  34. Mascoutah430 ft
  35. Darmstadt430 ft
  36. Washington Park420 ft
  37. New Athens Township420 ft
  38. New Athens420 ft
  39. St. Libory420 ft
  40. Engelmann Township420 ft
  41. Canteen Township420 ft
  42. Fairmont City420 ft
  43. East St. Louis420 ft
  44. Madison partly410 ft
  45. Sugar Loaf Township410 ft
  46. Fayetteville Township410 ft
  47. Fayetteville410 ft
  48. Dupo410 ft
  49. Centreville Township410 ft
  50. Brooklyn410 ft
  51. Stites Township410 ft
  52. Cahokia Heights410 ft
  53. Sauget410 ft
  54. East Carondelet400 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 140 ft at 38.5421° N, 90.1612° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.