Fults, IL Elevation & Topographic Map
Elevation
420 ft 130 m410 ft 125 m410 ft 125 m400 ft 120 m390 ft 120 m390 ft 120 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
Fults sits at about 390 ft (120 m) above sea level, the median height of all land inside village limits (too few residents to weight by).
Typical elevation (all land)
390 ft 120 m
few residents
Lowest
390 ft 120 m
on the west side
Highest
400 ft 120 m
on the southeast edge, below higher ground just outside
Average
390 ft 120 m
all land inside village limits
Fults is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 390 ft120 m |
| Highest point Inside village limits, on the southeast edge, below higher ground just outside | 400 ft120 m |
| Lowest point Inside village limits, on the west side | 390 ft120 m |
| Town center USGS map point for Fults | 390 ft120 m |
| Average of all land | 390 ft120 m |
Topographic Map
- Location
- Village in Monroe County, Illinois, United States
- Population
- 26 2024 est.
- Land area
- 0.1 sq mi
- Density
- 491 per sq mi
- Coordinates
- 38.1662° N, 90.2159° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Mississippi River → Gulf of America
- ZIP codes 1
- 62244
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Valmeyer700 ft
- Waterloo650 ft
- Maeystown500 ft
- Festus, MO480 ft
- Red Bud470 ft
- Bloomsdale, MO460 ft
- Herculaneum, MO450 ft
- Ruma450 ft
- Crystal City, MO440 ft
- Fults390 ft
- Prairie du Rocher390 ft
Rankings by typical elevation
- Towns in Illinois2,813th highest of 2,872
- Towns in Monroe Countylowest of 6
Peaks and hills nearest, by height
- Potato Hill, Monroe County710 ft
How we measure
- Typical elevation: the median height of all land inside the village limits; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.