Camas County, ID Elevation & Topographic Map

Topographic elevation map of Camas County, Idaho, shaded from 4,670 ft on the southeast side to 10,350 ft on the north side
Elevation
10,350 ft 3,155 m8,930 ft 2,725 m8,220 ft 2,505 m6,800 ft 2,075 m5,380 ft 1,640 m4,670 ft 1,425 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Camas County averages about 6,350 ft (1,935 m) above sea level across all its land. Its ground runs from 4,670 ft on the southeast side to 10,350 ft on the north side.

Average elevation
6,350 ft 1,935 m
all land inside the county
Highest
10,350 ft 3,155 m
on the north side
Lowest
4,670 ft 1,425 m
on the southeast side

Camas County spans about 5,680 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land6,350 ft1,935 m
Highest point
Inside the county, on the north side
10,350 ft3,155 m
Lowest point
Inside the county, on the southeast side
4,670 ft1,425 m

Elevation profile, south to north

42 mi south to north through Fairfield.

Topographic Map

Topographic elevation map of Camas County, Idaho, shaded from 4,670 ft on the southeast side to 10,350 ft on the north side
County boundary (dashed) over shaded terrain, with contours every 500 ft (152 m).
Location
County in Idaho, United States
Population
1,247 2024 est.
Land area
1,074.2 sq mi + 4.5 sq mi water
Density
1.2 per sq mi
Time zone
Mountain UTC−7 / −6
Landform regions
Northern Rocky Mountains 81%, Columbia Plateau 19%
Drains to
Pacific Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

The one town in Camas County
  1. Fairfield5,070 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.