Benewah County, ID Elevation & Topographic Map

Topographic elevation map of Benewah County, Idaho, shaded from 2,120 ft on the north side to 6,150 ft on Reeds Baldy
Elevation
6,150 ft 1,875 m5,140 ft 1,570 m4,640 ft 1,415 m3,630 ft 1,105 m2,620 ft 800 m2,120 ft 645 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Benewah County averages about 3,140 ft (960 m) above sea level across all its land. Its ground runs from 2,120 ft on the north side to 6,150 ft on Reeds Baldy.

Average elevation
3,140 ft 960 m
all land inside the county
Highest
6,150 ft 1,875 m
on Reeds Baldy
Lowest
2,120 ft 645 m
on the north side

Benewah County spans about 4,030 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land3,140 ft960 m
Highest point
Inside the county, on Reeds Baldy
6,150 ft1,875 m
Lowest point
Inside the county, on the north side
2,120 ft645 m

Elevation profile, south to north

26 mi south to north through St. Maries.

Topographic Map

Topographic elevation map of Benewah County, Idaho, shaded from 2,120 ft on the north side to 6,150 ft on Reeds Baldy
County boundary (dashed) over shaded terrain, with contours every 200 ft (61 m).
Location
County in Idaho, United States
Population
10,529 2024 est.
Land area
776.9 sq mi + 7.3 sq mi water
Density
14 per sq mi
Time zone
Pacific UTC−8 / −7
Landform regions
Northern Rocky Mountains 69%, Columbia Plateau 31%
Drains to
Pacific Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 6 towns in Benewah County by typical elevation
  1. Fernwood2,780 ft
  2. Plummer2,730 ft
  3. De Smet2,680 ft
  4. Tensed2,550 ft
  5. St. Maries2,270 ft
  6. Parkline2,270 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Highest ground: the single highest 3DEP cell, 6,160 ft at 47.4138° N, 116.3654° W, has no federal (GNIS) summit name within 980 ft (300 m), so the high point shown is the highest of the 25 highest cells with a GNIS summit within 1,640 ft (500 m).
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.