Santa Rosa County, FL Elevation & Topographic Map

Topographic elevation map of Santa Rosa County, Florida, shaded from sea level on East Bay to 290 ft on the northeast side
Elevation
290 ft 90 m220 ft 65 m180 ft 55 m110 ft 35 m37 ft 11 m0 ft 0 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Santa Rosa County averages about 120 ft (35 m) above sea level across all its land. Its ground runs from sea level on East Bay to 290 ft on the northeast side.

Average elevation
120 ft 35 m
all land inside the county
Highest
290 ft 90 m
on the northeast side
Lowest
0 ft 0 m
at sea level on East Bay

Santa Rosa County spans about 290 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

Under 1% of Santa Rosa County's land lies below the average daily high tide (MHHW, NOAA), and 3% lies less than 3 ft above it. Check flood zones on FEMA's map

FigureElevation
Average of all land120 ft35 m
Highest point
Inside the county, on the northeast side
290 ft90 m
Lowest point
Where the land meets East Bay
0 ft0 m

Elevation profile, south to north

53 mi south to north through Navarre.

Topographic Map

Topographic elevation map of Santa Rosa County, Florida, shaded from sea level on East Bay to 290 ft on the northeast side
County boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
County in Florida, United States
Population
207,653 2024 est.
Land area
1,012.4 sq mi + 209.8 sq mi water
Density
205 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Coastal Plain 97%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 36 towns in Santa Rosa County by typical elevation
  1. Jay260 ft
  2. Pine Level250 ft
  3. Berrydale240 ft
  4. Fidelis240 ft
  5. Brownsdale230 ft
  6. Dixonville230 ft
  7. Whitfield, Santa Rosa County210 ft
  8. New York200 ft
  9. Allentown200 ft
  10. Chumuckla200 ft
  11. Mount Carmel190 ft
  12. Springhill170 ft
  13. Point Baker170 ft
  14. Harold160 ft
  15. Cobbtown150 ft
  16. Wallace140 ft
  17. Munson130 ft
  18. Pace130 ft
  19. East Milton120 ft
  20. Pea Ridge120 ft
  21. Roeville67 ft
  22. Milton65 ft
  23. Bagdad36 ft
  24. Navarre29 ft
  25. Woodlawn Beach26 ft
  26. Holley22 ft
  27. Midway18 ft
  28. Tiger Point16 ft
  29. Floridatown16 ft
  30. Gulf Breeze15 ft
  31. Mulat13 ft
  32. Oriole Beach13 ft
  33. Dickerson City9 ft
  34. Avalon8 ft
  35. Garcon Point6 ft
  36. Navarre Beach5 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −2 ft at 30.3854° N, 86.8496° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones; NOAA tidal surfaces (MHHW). All public domain.