Otter Creek, FL Elevation & Topographic Map

Topographic elevation map of Otter Creek, Florida, shaded from 15 ft on the southwest side to 31 ft on the north side
Elevation
48 ft 15 m40 ft 12 m36 ft 11 m28 ft 8 m20 ft 6 m15 ft 5 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Town area
Fades everything outside the official town limits (US Census).

Elevation Data

Otter Creek sits at about 27 ft (8 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
27 ft 8 m
most residents: 19–29 ft
Lowest
15 ft 5 m
on the southwest side
Highest
31 ft 10 m
on the north side
Average
24 ft 7 m
all land inside town limits

Otter Creek is nearly flat: its ground varies by only about 16 ft, so the figures below sit close together.

FigureElevation
Typical
Where people live: half of residents higher, half lower
27 ft8 m
Highest point
Inside town limits, on the north side
31 ft10 m
Lowest point
Inside town limits, on the southwest side
15 ft5 m
Town center
USGS map point for Otter Creek
27 ft8 m
Average of all land24 ft7 m

Topographic Map

Topographic elevation map of Otter Creek, Florida, shaded from 15 ft on the southwest side to 31 ft on the north side
Town limits (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
Town in Levy County, Florida, United States
Population
114 2024 est.
Land area
1.4 sq mi
Density
84 per sq mi
Coordinates
29.3250° N, 82.7718° W
Time zone
Eastern UTC−5 / −4
Landform region
Coastal Plain
Drains to
Gulf of America
ZIP codes 1
32683
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.