Hamilton County, FL Elevation & Topographic Map

Topographic elevation map of Hamilton County, Florida, shaded from 28 ft on the southwest side to 270 ft on the east side
Elevation
270 ft 80 m210 ft 65 m180 ft 55 m120 ft 35 m58 ft 18 m28 ft 9 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Hamilton County averages about 120 ft (35 m) above sea level across all its land. Its ground runs from 28 ft on the southwest side to 270 ft on the east side.

Average elevation
120 ft 35 m
all land inside the county
Highest
270 ft 80 m
on the east side
Lowest
28 ft 9 m
on the southwest side

Hamilton County spans about 242 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land120 ft35 m
Highest point
Inside the county, on the east side
270 ft80 m
Lowest point
Inside the county, on the southwest side
28 ft9 m

Elevation profile, south to north

15 mi south to north through Jasper.

Topographic Map

Topographic elevation map of Hamilton County, Florida, shaded from 28 ft on the southwest side to 270 ft on the east side
County boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
County in Florida, United States
Population
14,334 2024 est.
Land area
514.3 sq mi + 4.8 sq mi water
Density
28 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Coastal Plain
Drains to
Gulf of America 83%, Closed basin (does not reach the sea) 13%
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 3 towns in Hamilton County by typical elevation
  1. Jennings150 ft
  2. White Springs120 ft
  3. Jasper110 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.