Bloomingdale, FL Elevation & Topographic Map

Elevation

79 ft 24 m59 ft 18 m49 ft 15 m30 ft 9 m10 ft 3 m0 ft 0 m

Contours every 100 ft, bold every 500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Area: Fades everything outside the official CDP boundary (US Census).

Elevation Data

Bloomingdale sits at about 55 ft (17 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

55 ft 17 m

most residents: 23–69 ft

Lowest

0 ft 0 m

on the west side

Highest

79 ft 24 m

on the east side

Average

47 ft 14 m

all land inside the CDP boundary

Bloomingdale spans about 79 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	55 ft17 m
Highest point Inside the CDP boundary, on the east side	79 ft24 m
Lowest point Inside the CDP boundary, on the west side	0 ft0 m
Average of all land	47 ft14 m

Elevation profile, west to east

4.4 mi west to east through the middle of Bloomingdale.

Topographic Map

Location: Unincorporated community (census-designated place) in Hillsborough County, Florida, United States
Population: 22,947 2020 Census
Land area: 8.1 sq mi + 0.2 sq mi water
Density: 2,821 per sq mi
Coordinates: 27.8792° N, 82.2648° W
Time zone: Eastern UTC−5 / −4
Landform region: Coastal Plain
Drains to: Gulf of America
ZIP codes 2: 33511 33596

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Balm76 ft
Valrico75 ft
Fish Hawk73 ft
Seffner70 ft
Riverview65 ft
Bloomingdale55 ft
Mango55 ft
Brandon40 ft
Palm River-Clair Mel19 ft
Progress Village18 ft
Gibsonton14 ft

Rankings by typical elevation

Towns in Florida348th highest of 958
Towns in Hillsborough County12th highest of 33

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Bloomingdale is an unincorporated community; figures cover the census-designated place, a statistical area.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.