Belleair Shore, FL Elevation & Topographic Map

Elevation

33 ft 10 m25 ft 8 m21 ft 6 m12 ft 4 m4 ft 1 m0 ft 0 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Belleair Shore sits at about 7 ft (2 m) above sea level, the median height of all land inside town limits (too few residents to weight by).

Typical elevation (all land)

7 ft 2 m

few residents

Lowest

0 ft 0 m

at sea level on the Gulf of America

Highest

9 ft 3 m

on the north side

Average

6 ft 2 m

all land inside town limits

Belleair Shore is nearly flat: its ground varies by only about 9 ft, so the figures below sit close together.

0% of Belleair Shore's land lies below the average daily high tide (MHHW, NOAA), and 4% lies less than 3 ft above it. Check flood zones on FEMA's map

Figure	Elevation
Typical (all land) Median of all land; too few residents to weight by	7 ft2 m
Highest point Inside town limits, on the north side	9 ft3 m
Lowest point Where the land meets the Gulf of America	0 ft0 m
Airport (PIE) FAA airport elevation, the highest point of its runways, 9.6 mi east of the town limits	11 ft3 m
Average of all land	6 ft2 m

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

How we measure

Typical elevation: the median height of all land inside the town limits; too few residents live here to weight by people.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS and Watershed Boundary Dataset; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA tidal surfaces (MHHW). All public domain.