Randolph County, AR Elevation & Topographic Map

Topographic elevation map of Randolph County, Arkansas, shaded from 240 ft on the south side to 930 ft on the northwest side
Elevation
930 ft 285 m760 ft 230 m670 ft 205 m500 ft 150 m330 ft 100 m240 ft 75 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Randolph County averages about 400 ft (120 m) above sea level across all its land. Its ground runs from 240 ft on the south side to 930 ft on the northwest side.

Average elevation
400 ft 120 m
all land inside the county
Highest
930 ft 285 m
on the northwest side
Lowest
240 ft 75 m
on the south side

Randolph County spans about 690 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land400 ft120 m
Highest point
Inside the county, on the northwest side
930 ft285 m
Lowest point
Inside the county, on the south side
240 ft75 m

Elevation profile, west to east

25 mi west to east through Pocahontas.

Topographic Map

Topographic elevation map of Randolph County, Arkansas, shaded from 240 ft on the south side to 930 ft on the northwest side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Arkansas, United States
Population
19,040 2024 est.
Land area
651.9 sq mi + 4.0 sq mi water
Density
29 per sq mi
Time zone
Central UTC−6 / −5
Landform regions
Ozark Plateaus 82%, Coastal Plain 18%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Oregon County, MO770 ft
  2. Sharp County560 ft
  3. Ripley County, MO520 ft
  4. Randolph County400 ft
  5. Lawrence County310 ft
  6. Greene County310 ft
  7. Clay County300 ft

Rankings by average elevation

Peaks and hills highest inside

  • Bellah Hills750 ft
  • Higgs Mountain740 ft
  • Gentry Hill730 ft
  • Ellison Hill710 ft
  • Bald Hill, Randolph County690 ft
All 7 towns in Randolph County by typical elevation
  1. Ravenden Springs480 ft
  2. Warm Springs480 ft
  3. Maynard420 ft
  4. Pocahontas330 ft
  5. Biggers290 ft
  6. Reyno280 ft
  7. O'Kean270 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 220 ft at 36.2993° N, 90.9840° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.