Pope County, AR Elevation & Topographic Map

Topographic elevation map of Pope County, Arkansas, shaded from 280 ft on the south side to 2,200 ft on the north side
Elevation
2,200 ft 670 m1,720 ft 525 m1,480 ft 450 m1,000 ft 305 m520 ft 160 m280 ft 85 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Pope County averages about 850 ft (260 m) above sea level across all its land. Its ground runs from 280 ft on the south side to 2,200 ft on the north side.

Average elevation
850 ft 260 m
all land inside the county
Highest
2,200 ft 670 m
on the north side
Lowest
280 ft 85 m
on the south side

Pope County spans about 1,920 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land850 ft260 m
Highest point
Inside the county, on the north side
2,200 ft670 m
Lowest point
Inside the county, on the south side
280 ft85 m

Elevation profile, south to north

38 mi south to north through Russellville.

Topographic Map

Topographic elevation map of Pope County, Arkansas, shaded from 280 ft on the south side to 2,200 ft on the north side
County boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
County in Arkansas, United States
Population
64,829 2024 est.
Land area
811.0 sq mi + 19.6 sq mi water
Density
80 per sq mi
Time zone
Central UTC−6 / −5
Landform regions
Ouachita 70%, Ozark Plateaus 30%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 8 towns in Pope County by typical elevation
  1. Hector750 ft
  2. Oak Grove, Pope County610 ft
  3. Appleton550 ft
  4. Dover450 ft
  5. London390 ft
  6. Pottsville380 ft
  7. Russellville380 ft
  8. Atkins370 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.