Cleveland County, AR Elevation & Topographic Map

Topographic elevation map of Cleveland County, Arkansas, shaded from 110 ft on the southeast side to 320 ft on the south side
Elevation
320 ft 100 m270 ft 80 m240 ft 75 m190 ft 55 m130 ft 40 m110 ft 30 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Cleveland County averages about 200 ft (60 m) above sea level across all its land. Its ground runs from 110 ft on the southeast side to 320 ft on the south side.

Average elevation
200 ft 60 m
all land inside the county
Highest
320 ft 100 m
on the south side
Lowest
110 ft 30 m
on the southeast side

Cleveland County spans about 210 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land200 ft60 m
Highest point
Inside the county, on the south side
320 ft100 m
Lowest point
Inside the county, on the southeast side
110 ft30 m

Elevation profile, south to north

25 mi south to north through Rison.

Topographic Map

Topographic elevation map of Cleveland County, Arkansas, shaded from 110 ft on the southeast side to 320 ft on the south side
County boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
County in Arkansas, United States
Population
7,367 2024 est.
Land area
597.9 sq mi + 1.0 sq mi water
Density
12 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Coastal Plain
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 6 towns in Cleveland County by typical elevation
  1. New Edinburg270 ft
  2. Woodlawn260 ft
  3. Staves240 ft
  4. Rison240 ft
  5. Kingsland220 ft
  6. Rye210 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.