Boone County, AR Elevation & Topographic Map

Topographic elevation map of Boone County, Arkansas, shaded from 650 ft on the north side to 2,240 ft on the southwest side
Elevation
2,240 ft 680 m1,840 ft 560 m1,640 ft 500 m1,250 ft 380 m850 ft 260 m650 ft 200 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Boone County averages about 1,200 ft (365 m) above sea level across all its land. Its ground runs from 650 ft on the north side to 2,240 ft on the southwest side.

Average elevation
1,200 ft 365 m
all land inside the county
Highest
2,240 ft 680 m
on the southwest side
Lowest
650 ft 200 m
on the north side

Boone County spans about 1,590 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,200 ft365 m
Highest point
Inside the county, on the southwest side
2,240 ft680 m
Lowest point
Inside the county, on the north side
650 ft200 m

Elevation profile, west to east

23 mi west to east through Harrison.

Topographic Map

Topographic elevation map of Boone County, Arkansas, shaded from 650 ft on the north side to 2,240 ft on the southwest side
County boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
County in Arkansas, United States
Population
38,636 2024 est.
Land area
589.7 sq mi + 12.3 sq mi water
Density
66 per sq mi
Time zone
Central UTC−6 / −5
Landform region
Ozark Plateaus
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Newton County1,580 ft
  2. Carroll County1,350 ft
  3. Boone County1,200 ft
  4. Searcy County1,170 ft
  5. Taney County, MO980 ft
  6. Marion County890 ft

Rankings by average elevation

Peaks and hills highest inside

  • Kosky Point2,160 ft
  • Gaither Mountain2,150 ft
  • Piney Mountain, Boone County2,140 ft
  • Cone Point2,130 ft
  • Pilot Mountain, Boone County2,120 ft
All 12 towns in Boone County by typical elevation
  1. Batavia1,510 ft
  2. Omaha1,330 ft
  3. Bergman1,270 ft
  4. Alpena1,200 ft
  5. Harrison1,190 ft
  6. Bellefonte1,100 ft
  7. Valley Springs1,080 ft
  8. Zinc1,030 ft
  9. Everton850 ft
  10. Diamond City790 ft
  11. South Lead Hill790 ft
  12. Lead Hill770 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.