Cutter, AZ Elevation & Topographic Map

Topographic elevation map of Cutter, Arizona, shaded from 3,150 ft on the northeast side to 3,310 ft on the northwest side
Elevation
3,310 ft 1,010 m3,270 ft 995 m3,250 ft 990 m3,210 ft 980 m3,170 ft 965 m3,150 ft 960 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Cutter sits at about 3,210 ft (980 m) above sea level, the median height of all land inside the CDP boundary (too few residents to weight by).

Typical elevation (all land)
3,210 ft 980 m
few residents
Lowest
3,150 ft 960 m
on the northeast side
Highest
3,310 ft 1,010 m
on the northwest side
Average
3,210 ft 980 m
all land inside the CDP boundary

Cutter spans about 160 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical (all land)
Median of all land; too few residents to weight by
3,210 ft980 m
Highest point
Inside the CDP boundary, on the northwest side
3,310 ft1,010 m
Lowest point
Inside the CDP boundary, on the northeast side
3,150 ft960 m
Town center
USGS map point for Cutter
3,160 ft965 m
Airport (P13)
FAA airport elevation, the highest point of its runways, 0.1 mi west of the CDP boundary
3,261 ft994 m
Average of all land3,210 ft980 m
Nearest peak
Hog Mountain, 6.8 mi south of the CDP boundary (NGS survey)
5,760 ft1,756 m

Elevation profile, south to north

0.6 mi south to north through the town center.

Altitude Effects

What 3,210 ft means day to day, worked out from the typical elevation.

Water boils at
206.0 °F96.7 °C

vs 212 °F at sea level; USDA: food takes longer to cook.

Air pressure
89% of sea level

26.6 inHg (90.1 kPa): each breath holds 11% less air.

Oxygen equivalent
18.6% at sea level

Air is still 21% oxygen, just thinner. Normal at the coast: 20.9%.

Sunburn
+6% more UV

EPA: UV rises about 2% for every 1,000 ft.

Topographic Map

Topographic elevation map of Cutter, Arizona, shaded from 3,150 ft on the northeast side to 3,310 ft on the northwest side
CDP boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
Unincorporated community (census-designated place) in Gila County, Arizona, United States
Population
84 2020 Census
Land area
0.8 sq mi
Density
102 per sq mi
Coordinates
33.3528° N, 110.6526° W
Time zone
Mountain UTC−7, no daylight saving
Landform region
Basin and Range
Drains to
Gila River → Colorado River → Gulf of California
Airport
San Carlos Apache (P13) 3,261 ft
ZIP codes 1
85550
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

How we measure
  • Typical elevation: the median height of all land inside the CDP boundary; too few residents live here to weight by people.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Altitude effects: standard-atmosphere formulas applied to the typical elevation; UV from EPA's rule of thumb (about 2% per 1,000 ft).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Cutter is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.