Hale County, AL Elevation & Topographic Map
Elevation
590 ft 180 m460 ft 140 m400 ft 120 m270 ft 80 m140 ft 40 m74 ft 23 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Hale County averages about 210 ft (65 m) above sea level across all its land. Its ground runs from 75 ft on the southwest side to 590 ft on the northeast side.
Average elevation
210 ft 65 m
all land inside the county
Highest
590 ft 180 m
on the northeast side
Lowest
75 ft 23 m
on the southwest side
Hale County spans about 515 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 210 ft65 m |
| Highest point Inside the county, on the northeast side | 590 ft180 m |
| Lowest point Inside the county, on the southwest side | 75 ft23 m |
Elevation profile, west to east
17 mi west to east through Moundville.
Topographic Map
- Location
- County in Alabama, United States
- Population
- 15,116 2024 est.
- Land area
- 644.0 sq mi + 12.5 sq mi water
- Density
- 23 per sq mi
- Time zone
- Central UTC−6 / −5
- Landform region
- Coastal Plain
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Bibb County410 ft
- Tuscaloosa County360 ft
- Perry County280 ft
- Hale County210 ft
- Greene County170 ft
- Marengo County170 ft
Rankings by average elevation
- Counties in Alabama56th highest of 67
- Counties in the United States2,760th highest of 3,151
All 4 towns in Hale County by typical elevation
- Greensboro260 ft
- Moundville200 ft
- Newbern180 ft
- Akron130 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.