San Felipe Pueblo, NM Elevation & Topographic Map
Elevation
6,440 ft 1,965 m6,100 ft 1,860 m5,930 ft 1,805 m5,590 ft 1,705 m5,250 ft 1,600 m5,070 ft 1,545 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official reservation boundary (US Census).
Elevation Data
San Felipe Pueblo averages about 5,450 ft (1,660 m) above sea level across all its land. Its ground runs from 5,070 ft on the southwest side to 6,443 ft on Santa Ana Mesa.
Average elevation
5,450 ft 1,660 m
all land inside the reservation
Highest
6,443 ft 1,964 m
on Santa Ana Mesa
Lowest
5,070 ft 1,545 m
on the southwest side
San Felipe Pueblo spans about 1,370 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 5,450 ft1,660 m |
| Highest point Inside the reservation, on Santa Ana Mesa (NGS survey height) | 6,443 ft1,964 m |
| Lowest point Inside the reservation, on the southwest side | 5,070 ft1,545 m |
Elevation profile, west to east
9.8 mi west to east through San Felipe Pueblo.
Topographic Map
- Location
- Reservation in New Mexico, United States (U.S. Census Bureau)
- Population
- 3,686 2020 Census
- Land area
- 79.6 sq mi + 0.4 sq mi water
- Density
- 46 per sq mi
- Time zone
- Mountain UTC−7 / −6
- Landform region
- Basin and Range
- Drains to
- Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearest tribal lands nearest, by average
- Santo Domingo Pueblo5,590 ft
- Santa Ana Pueblo5,580 ft
- San Felipe Pueblo5,450 ft
- Sandia Pueblo5,440 ft
- San Felipe Pueblo/Santo Domingo Pueblo joint-use area5,320 ft
- San Felipe Pueblo/Santa Ana Pueblo joint-use area5,180 ft
Rankings by average elevation
- Tribal lands in New Mexico20th highest of 24
Peaks and hills highest inside
- Santa Ana Mesa6,443 ft
- La Mesita, Sandoval County5,320 ft
All 2 towns in the reservation by typical elevation
- San Felipe Pueblo5,160 ft
- Algodones5,100 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census reservation boundary (TIGER/Line AIANNH, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Pits: the lowest point is the lowest ground outside closed hollows of under 0.4 sq mi (1 km²) (quarry floors, mine pits, terrain-model artifacts) and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 5,070 ft at 35.3693° N, 106.5093° W, is in such a hollow or patch and is not counted.
- Name: the Census Bureau's legal or statistical area name, as published; the nation's own name may differ.
- Population: 2020 Census residents of the blocks inside the boundary.
- Nearby Places: nearest tribal lands and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the reservation with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the reservation.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks); NOAA NGS survey heights; BTS time zones. All public domain.