Rappahannock Trust Land, VA Elevation & Topographic Map

Topographic elevation map of Rappahannock Trust Land, Virginia, shaded from 120 ft on the northwest side to 180 ft on the southeast side
Elevation
180 ft 55 m170 ft 50 m160 ft 50 m140 ft 45 m130 ft 40 m120 ft 35 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official trust land boundary (US Census).

Elevation Data

Rappahannock Trust Land averages about 170 ft (50 m) above sea level across all its land. Its ground runs from 120 ft on the northwest side to 180 ft on the southeast side.

Average elevation
170 ft 50 m
all land inside the trust land
Highest
180 ft 55 m
on the southeast side
Lowest
120 ft 35 m
on the northwest side

Rappahannock Trust Land spans about 60 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land170 ft50 m
Highest point
Inside the trust land, on the southeast side
180 ft55 m
Lowest point
Inside the trust land, on the northwest side
120 ft35 m

Topographic Map

Topographic elevation map of Rappahannock Trust Land, Virginia, shaded from 120 ft on the northwest side to 180 ft on the southeast side
Census trust land boundary (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
Off-reservation trust land in Virginia, United States (U.S. Census Bureau)
Land area
0.2 sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Coastal Plain
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census trust land boundary (TIGER/Line AIANNH, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Name: the Census Bureau's legal or statistical area name, as published; the nation's own name may differ.
  • Population: 2020 Census residents of the blocks inside the boundary.
  • Nearby Places: nearest tribal lands and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the trust land with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks); NOAA NGS survey heights; BTS time zones. All public domain.