Ramapough SDTSA, NJ Elevation & Topographic Map
Elevation
1,160 ft 355 m930 ft 285 m820 ft 250 m590 ft 180 m360 ft 110 m240 ft 75 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official statistical area boundary (US Census).
Elevation Data
Ramapough SDTSA averages about 680 ft (205 m) above sea level across all its land. Its ground runs from 240 ft on the southeast side to 1,159 ft on Bald Mountain.
Average elevation
680 ft 205 m
all land inside the statistical area
Highest
1,159 ft 353 m
on Bald Mountain
Lowest
240 ft 75 m
on the southeast side
Ramapough SDTSA spans about 920 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 680 ft205 m |
| Highest point Inside the statistical area, on Bald Mountain (NGS survey height) | 1,159 ft353 m |
| Lowest point Inside the statistical area, on the southeast side | 240 ft75 m |
Elevation profile, west to east
2.6 mi west to east through the middle of Ramapough SDTSA.
Topographic Map
- Location
- State designated tribal statistical area in New Jersey, United States (U.S. Census Bureau)
- Population
- 828 2020 Census
- Land area
- 7.2 sq mi + 0.1 sq mi water
- Density
- 115 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- New England
- Drains to
- Atlantic Ocean
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearest tribal lands nearest, by average
- Schaghticoke (state) Reservation, CT880 ft
- Ramapough SDTSA680 ft
- Golden Hill Paugussett (state) Reservation, CT530 ft
- Mohegan Reservation, CT120 ft
- Poospatuck (state) Reservation, NY16 ft
- Shinnecock (state) Reservation, NY11 ft
Rankings by average elevation
- Tribal lands in New Jerseyhighest of 2
- Tribal lands in the United States339th highest of 704
Peaks and hills highest inside
- Bald Mountain1,159 ft
- Green Hill820 ft
All 2 towns in the statistical area by typical elevation
- Ringwood partly490 ft
- Mahwah Township partly380 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census statistical area boundary (TIGER/Line AIANNH, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Name: the Census Bureau's legal or statistical area name, as published; the nation's own name may differ.
- Population: 2020 Census residents of the blocks inside the boundary.
- Nearby Places: nearest tribal lands and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the statistical area with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the statistical area.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks); NOAA NGS survey heights; BTS time zones. All public domain.